The Best Projectors for Golf Simulators
In a golf simulator, the projector has to fill the impact screen without hanging in the swing path. Start with the hitting line and available mounting positions.
We may earn a commission from links in this guide. As an Amazon Associate I earn from qualifying purchases.
In a golf simulator, the ball and the projector have to share a room without meeting. A machine mounted in the swing path or placed where the golfer casts a shadow will ruin the setup, regardless of its brightness. Begin with the impact screen and hitting line, then calculate the throw. The Optoma GT2400HDR and BenQ TH671ST become useful comparisons only after that geometry works.
The Optoma GT2400HDR is the short-throw model we would check first when mounting distance is limited. The BenQ TK710STi is a more expensive comparison if the room also serves movies or games in 4K. The ViewSonic LS740HD belongs in a room with more distance to work with. Use each maker’s throw data for your exact screen width rather than assuming a projector can fill it.

Everything we recommend
Our picks

Our starting short-throw pick
Optoma GT2400HDR
A golf bay creates placement constraints that a living room does not. The GT2400HDR's short throw can position the lens nearer the impact screen, but sketch the full beam between lens and screen so a golfer, club or protective enclosure does not interrupt it. Task lighting and simulator contrast pull in different directions. Keep the lights you need away from the screen when possible, and check the projected image shape against the actual visible hitting area.

Another short-throw option
BenQ TH671ST
The TH671ST is a sensible lower-cost comparison if 1080p simulation graphics are enough for your bay. Translate the throw ratio into your screen's visible width, then mark the lens location, power and video cable. If that location is above or behind a player, examine shadows through the full swing and stance. A convenient price cannot compensate for a beam that crosses the hitting area or a screen shape that requires extensive cropping.

For comparing a short-throw setup
Optoma GT2000HDR
The GT2000HDR's nearer placement may help keep the light source ahead of a player. That depends on ceiling height and image geometry, not just a quoted five-foot example. Measure the usable impact surface rather than the outside frame and check the lens-to-screen location for that size. Consider how you will shield the unit from a stray ball and route cables out of the swing area. A simulator projector should be planned with the enclosure, not added after it is built.
The research
Start from the hitting line
In a golf simulator, the golfer, ball, impact screen and projector all share a narrow geometry. The image should fill the visible screen without putting the projector in the swing path or letting the golfer cast a shadow across the target. Draw the hitting line and screen first, then use the maker’s throw calculator to see where a candidate can be mounted. A short-throw label does not guarantee it will work from your particular ceiling position.
The Optoma GT2400HDR and BenQ TH671ST belong in that calculation for different budgets and signal needs. Also check the image shape your simulator software outputs. A 4:3 impact area and a 16:9 video signal may leave unused space or crop parts of the picture. The screen’s actual visible width is the number that belongs in the throw calculation.
A simulator is a working room
Protect the projector from ball strikes and leave ventilation around it. A ceiling position may be tidy but still collide with a club’s path or make maintenance difficult. If the projector sits behind the golfer, check shadows at the point of impact. If it sits ahead, plan protection and cables so nobody trips during a round.
Brightness matters because many simulator rooms stay lit enough to see a ball and move safely. Yet a high brightness claim cannot compensate for a poor screen surface or an image too large for the available throw. Treat the projector, enclosure, launch monitor and hitting area as one system. The best pick is the model that fits that geometry and displays the software clearly, not simply the most expensive one in the list.
How to choose the best projector for golf simulator use
Start with a plan view and a side view of the bay. Mark the hitting line, screen plane, ceiling height, enclosure depth, ball flight area and the golfer’s tallest backswing. Then draw the projector’s proposed lens position and light cone. A projector that clears the club in plan view may still hang too low or cast a shadow from above. Leave the clearances required by the screen and projector manuals. A protective housing may be appropriate in some bays, but it cannot fix a mount in the swing path.
Calculate throw from visible screen width
A projector’s throw ratio relates lens distance to the width of the projected image. Multiply the screen’s usable image width by the maker’s throw ratio range to estimate the mounting window, then use the maker’s calculator for the exact model. As one example, BenQ specifies a 0.69 to 0.83 throw ratio for the TH671ST. Measure the visible white area, not the enclosure’s outside frame. Record both the nearest and farthest workable lens positions, since the projector body, cable bend and ventilation need additional room. Keystone correction can square a picture, but it should not be the primary fix for a badly placed mount.
Match simulator output to the impact screen
Many simulator bays use a taller or narrower impact area than a 16:9 television image. If the PC outputs 16:9 onto a 4:3 or square-ish surface, you may get unused screen area or cropped graphics. Check the simulator software’s supported resolutions and the projector’s input modes before planning the lens position. A custom resolution may help, but only if the PC, software and projector accept it reliably. Decide how the same setup will handle movies separately; filling the entire impact screen is not always the best setting for both uses.
Start with the impact screen and hitting line
A golf simulator has a fixed hitting position and an impact screen designed to take repeated ball strikes. Choose and mount the screen and enclosure according to their own instructions before trying to fill them with an image. Its advertised size may include borders, side protection or unused material. Measure the visible area after installation. Then set the computer and software output for that usable shape, preserving readable menus and yardage data rather than cropping them to fill every inch.
A short-throw model such as the Optoma GT2400HDR, GT2000HDR or BenQ TH671ST can help place the lens ahead of the player while filling a large screen. The BenQ TK710STi adds a 4K-oriented option if its throw range and source modes fit. ViewSonic LS740HD is another model to compare on placement and brightness. Use each maker’s throw calculator for the specific screen width; a model name alone does not establish that it clears the hitting zone.

For 4K and dual use
BenQ TK710STi
A choice for a simulator PC that can render a sharp 4K course image and a bay that also serves for games or movies. Higher resolution is most visible only if the software output, projector mode and screen size support it. The short-throw lens still needs a precise mount position, so confirm the image width and height with the maker’s calculator. If the simulator primarily outputs 1080p, spend first on a better-fitting bay and impact screen rather than assuming a 4K label solves placement.
Check for shadows, strikes and heat
Mark the golfer’s backswing and follow-through, the club path, the projected light beam and the proposed mount before buying. A ceiling projector placed too far behind can cast a player shadow; placed in the wrong spot, it can be vulnerable to a club or ball. Follow the simulator enclosure and projector makers’ clearance and protection guidance. An impact screen is not a substitute for a suitable mounting plan.
The room may have more ambient light than a cinema. Compare the usable brightness at the intended image size, and remember that ceiling light aimed at the screen can wash out the picture. If you will also watch movies, decide whether a 16:9 image on a taller simulator screen is an acceptable compromise.
What we compared
We compared published throw ranges, image formats and mounting constraints because those determine whether a projector can work in a particular bay. Use current maker manuals and throw calculators for the exact screen width, source mode and ceiling position before ordering. The best projector on paper is a poor buy if its lens cannot land in a safe part of the room.

For more mounting distance
ViewSonic LS740HD
A longer-throw alternative if your room has depth and a protected mounting position behind the hitting area. For a 10-foot-wide 16:9 picture, the published throw range translates to roughly 11 to 15 feet from lens to screen. In many bays that could put the golfer between lens and screen, so map the full light cone before choosing it. It may be a fit for a spacious room with a high or offset mount, but the brightness figure alone does not make it a simulator-safe choice.
A golf bay has a different geometry from a cinema
Mark the impact-screen width and the hitting line before selecting a projector. The lens must make the desired image from a location where a player and club will not cast a disruptive shadow or strike the unit. Ceiling height, enclosure depth and the position of the launch monitor all constrain that location. Use the manufacturer’s throw calculator with visible screen width, not the nominal size of the whole enclosure. Check whether the aspect ratio of the simulator output matches the impact area.
A short-throw model may work above and slightly behind the golfer, but its actual mounting position depends on the room and screen. Protect cables, allow ventilation and follow the projector’s mounting guidance. A bright 1080p unit can be a sensible fit for a working practice bay; 4K is useful only if the simulator source, screen and placement can make use of it. Before ordering, sketch the player, lens, screen and ceiling obstacles at scale and ask the installer to verify the light path.
Common questions
Do I need 4K for a simulator? A well-fitted image and reliable placement come first. Higher resolution may be useful for detailed graphics if your source and budget support it.
Can I put a projector behind the golfer? Only if its beam and mount avoid shadows and the swing area. Map the actual room.
Will a movie screen work? A golf simulator needs a purpose-built impact screen and enclosure appropriate for ball strikes.

