The Best 4K Projectors
A 4K projector for a living room is a different purchase from one for a dark theater. The XGIMI HORIZON 20 offers a flexible setup; gaming and console placement can change the choice.
We may earn a commission from links in this guide. As an Amazon Associate I earn from qualifying purchases.
A 4K projector can make a wall feel like a cinema screen, but the wrong one can be awkward every time you use it. A living-room shelf, a ceiling mount and a cabinet beneath the screen call for different machines. We start with the XGIMI HORIZON 20 for a flexible room and compare it with compact, gaming and ultra-short-throw choices once the placement is clear.
The XGIMI HORIZON 20 is the flexible choice for movies and streaming. We like the smaller JMGO N1S 4K Upgrade for occasional use in a darker room; the Hisense PX3-PRO belongs beneath a permanent screen. The Epson LS11000 is for a planned theater with separate components. Decide where the lens can go and what the whole system will cost before choosing one.

Everything we recommend
Our picks

Our pick
XGIMI HORIZON 20
A flexible throw and lens controls make this a practical starting point for a normal room, but they are not a substitute for planning. Decide where the image should land, then calculate the lens position for the desired width. The integrated streaming may make casual movie night easier, while a separate audio system can still be worthwhile for a large picture. If the projector will be put away after each use, the repeatable setup matters as much as what it can do in an ideal fixed position.

For a smaller dark room
JMGO N1S 4K Upgrade
The N1S is for a household that wants to carry the projector to a shelf or table and start a film without a permanent installation. Its gimbal makes aiming convenient, but the fixed throw still decides how large an image a particular room can support. Mark the power outlet, viewing surface and the place you will store the unit afterward. A compact chassis will not make a bright wall into a dark theater, so compare the room in the light you normally watch in.

For a front console
Hisense PX3-PRO
The PX3-PRO changes the furniture plan. The unit lives on a low console near a flat screen, which can keep cables at the front of the room and avoid a ceiling run. That convenience depends on precise cabinet height and depth, a suitable screen and enough room for the picture to rise unobstructed. Price those parts before comparing it with a conventional projector. A textured wall or a screen that waves can be especially distracting when the light arrives at such a steep angle.
The research
What to consider when choosing the best 4K projector
Where it will sit
Measure the lens-to-screen distance and the room’s light. A long-throw projector across the room is a different installation from an ultra-short-throw unit on a console below the screen.
Image size and light
Choose the screen size and room light together. A larger image spreads the available light over more area. Manufacturer brightness ratings use different methods and are not a direct substitute for a measured comparison.
Setup flexibility
Optical zoom and lens shift can help align an image without tilting the projector. Keystone correction is convenient, but it changes the image digitally. Check each model’s throw range before buying a mount or screen.
Sources and gaming
Confirm your actual resolution, refresh rate, HDMI and audio path. Built-in streaming may simplify a room, while a receiver or console can change which ports and modes matter.
How the highlighted picks compare
Swipe the table to see all three models →
| Published spec | XGIMI HORIZON 20 | JMGO N1S 4K Upgrade | Hisense PX3-PRO |
|---|---|---|---|
| Placement | Across the room | Portable gimbal | Console below screen |
| Throw ratio | 1.2–1.5:1 | 1.2:1 | 0.22:1 |
| Rated brightness | 3,200 ISO lumens | 1,700 ISO lumens | 3,000 ANSI lumens |
| Light source | RGB triple laser | RGB laser | RGB triple laser |
| Published image size | 40–300 in | 40–200 in | 80–150 in |
| Streaming | Google TV | Google TV | Google TV (US model) |
These figures come from manufacturers. ISO and ANSI lumen figures use different methods, so do not compare the numbers as though they came from one test. Sources: XGIMI, JMGO, Hisense.

4K is only one part of a large picture
At a typical sofa distance, the experience also depends on contrast, light in the room and whether the projected image is the size you hoped for. A 4K label cannot make a washed-out afternoon picture rich, or rescue a projector installed outside its useful throw range. Decide the picture width you want and the amount of daylight you can control before comparing resolutions and processing claims.
The XGIMI HORIZON 20 is a flexible starting point, the JMGO N1S 4K Upgrade emphasizes a compact movable setup and the Hisense PX3-PRO changes the placement by sitting near the wall. They solve different rooms. Compare the installation you will actually use rather than treating the highest specification as the winner.
A good setup avoids daily fiddling
If you plan to watch television as well as movies, the projector has to turn on, find a source and play sound without a long sequence of adjustments. Think through where the remote, streaming device and speakers live. A built-in interface may simplify a temporary setup, but a dedicated source can be easier to keep current. Verify the inputs you need for your console or receiver and how audio gets back to the system.
A ceiling mount can be tidy in a dedicated room, while a tabletop unit can share a living space more easily. An ultra-short-throw design reduces the long cable run but is sensitive to the cabinet and screen surface. A realistic drawing of the room is more useful than another tab of projector specifications.
4K input and 4K display
Start by distinguishing the signal a projector accepts from the image it puts on the screen. A listing may advertise 4K compatibility because it accepts a 4K source while displaying fewer pixels. Other models use pixel shifting to produce an 8.29-million-pixel on-screen image, as Epson describes for the LS11000. DLP and 3LCD systems take different paths to that result. Check the manufacturer’s displayed-resolution language, supported refresh rates and HDR formats for the exact model. Those specifications establish compatibility, not how sharp the image looks from your seat or how well it handles dark scenes.

For a separate streaming box
Optoma UHZ36
Optoma lists 4K UHD display resolution, a laser light source and 3,500 ISO lumens for the UHZ36. It is worth comparing if you already use a streaming box, console or AV receiver and want to build around those devices rather than a projector’s app interface. The published features include a 15-watt speaker, HDR support, FILMMAKER MODE and automatic vertical keystone correction. Check the throw distance against your planned image size and look at the port layout before ordering. A brightness rating alone cannot establish how the projector handles dark scenes, color or reflections in your room.
Choose the size from your seat
Work backward from the screen location and seating distance. A 100-inch 16:9 image is about 87 inches wide; a projector with a 1.2:1 throw ratio needs roughly 104 inches, or 8.7 feet, from lens to screen before you account for its adjustment range. XGIMI’s 1.2–1.5:1 range gives more placement flexibility than JMGO’s fixed 1.2:1 figure. The Hisense PX3-PRO is ultra-short-throw and belongs on a console near the screen, so use its own placement diagram rather than this across-the-room example. A wider image spreads available light over more area. Control window light and reflections, then choose image size and screen material together.

For movies and gaming
ViewSonic LX700-4K
The LX700-4K is the gaming-focused comparison in this list. ViewSonic lists a 4K UHD picture, a 3,500 ANSI-lumen rating and a mode up to 240 Hz with a claimed response as low as 4.2 milliseconds. That fastest mode is not the same as 4K at 240 Hz; check the supported resolution and refresh-rate combination for the game you actually play. A console, receiver, HDMI cable and display setting all need to support the chosen mode. For movies, compare placement and image size as carefully as gaming specifications.
When it helps to save on the projector
Pay for the features that solve your room’s problem. Optical zoom and lens shift are useful when a mount or shelf cannot move easily. The XGIMI HORIZON 20 lists both; the JMGO N1S 4K instead uses a compact gimbal for occasional setup. A permanent movie room may benefit from the Epson LS11000’s motorized lens memories, particularly with more than one screen aspect ratio. A brighter published rating can be useful for a larger image or some room light, but it is not a measured quality ranking and ANSI and ISO numbers should not be mixed into one league table. If you already have a receiver and streaming box, a projector’s built-in apps may matter less.

For a bigger image
XGIMI HORIZON 20 Max
The HORIZON 20 Max is the brighter alternative within XGIMI’s HORIZON 20 series. XGIMI rates it at 5,700 ISO lumens versus 3,200 ISO lumens for the standard HORIZON 20, using the same published brightness unit. It also lists RGB triple-laser light, optical zoom and lens shift. That difference is relevant if you need a larger screen or cannot fully darken the room, but it does not guarantee a measured on-screen brightness result in your space. Screen gain, image size and ambient light remain part of the setup. Compare the physical placement and total cost before paying for the higher-rated model.
Check your whole signal chain
A claimed 240 Hz mode may apply at 1080p rather than at 4K. ViewSonic’s LX700-4K is an example: check its 4K mode separately from its faster low-resolution mode. XGIMI publishes different latency figures for 4K at 60 Hz and 1080p at higher refresh rates. Epson lists 4K up to 120 Hz with compatible sources. The console or PC, receiver, HDMI cable and selected input must all pass the signal you want. For audio, check whether the projector sends sound back to a receiver or soundbar through eARC, or whether your source connects to the receiver first. For input lag, compare independent measurements made at the exact resolution and refresh rate you use.

For a permanent movie room
Epson Home Cinema LS11000
The LS11000 is the installation-focused option for a dedicated theater. Epson uses its 4K PRO-UHD pixel-shifting system to produce an 8.29-million-pixel on-screen image and lists 2,500 lumens of white brightness and 2,500 lumens of color brightness under different stated methods. Its motorized lens supports zoom, focus and lens shift with ten memory presets, which is useful when changing between widescreen films and 16:9 content on a fixed screen. Epson also lists 4K at up to 120 Hz for compatible sources. Plan for a separate streaming device or receiver as part of the system.
A projector choice begins with a drawing
Draw the screen as a width, not only a diagonal. Mark where the lens can actually sit, the seating position and any ceiling lights or fans. Use the maker’s throw calculator for each candidate to find its possible image width from that lens location. Optical zoom and lens shift give room to align a fixed installation; automatic keystone may help a temporary setup but cannot move the projector into a position the lens does not support. A 4K label does not rescue a model with the wrong throw for your room.
Decide whether the picture will be watched in a dark room, with lamps on or during daytime. A larger image spreads the available light across more area, so budget for light control and a suitable screen alongside the projector. Check the entire signal path from streaming box or console through any receiver to the projector, including the refresh rate and HDR format you intend to use. The best 4K projector for a dedicated theater can be an awkward living-room purchase if the room cannot support its installation.
The research
How this guide was assembled
We compared manufacturer specification pages and manuals for the seven named models, focusing on installation geometry, displayed resolution, light source, published brightness method, screen size, connectivity and gaming modes. The order follows the room and use cases each model can serve.
Who this is for
This guide is for someone choosing a 4K home projector for movies, streaming or games. The first decision is whether the projector will sit across the room, move between locations or live below a permanent screen. Those placements do not share the same screen and furniture requirements. If you are planning a dedicated theater, the Epson’s motorized lens is worth examining; if you want a simpler temporary setup, the JMGO’s gimbal and built-in streaming may be more relevant.
Performance details worth checking
For a major projector purchase, compare independent measurements of on-screen brightness under consistent conditions, contrast in dark scenes, color accuracy, input lag at your intended resolution and refresh rate, fan noise and focus uniformity. Also check recent reports of streaming software and firmware behavior. Manufacturer ratings use different methods and cannot answer every room-specific question on their own.
Specification review: November 15, 2026. Model revisions and software features can change. Verify the exact listing and current manufacturer documentation before buying.

